Conference Call; Send Call Waiting; Switch Between Calls; Answer Call Waiting - ASCOM d81 User Manual

User Manual
Ascom d81 DECT Handset

5.3.11 Conference Call

Prerequisite, a new call has been started during conversation, see
during Conversation
By initiate a conference call, an conversation can be made between several participants
simultaneously.
1 Press "More" during the call.
2 Select "Conference call".
3 Press "Select".
The person initiating the conference call is the conference leader, and the other are
participant members of the conference call.

5.3.12 Send Call Waiting

This feature can be used when you want to announce a person that you are trying to reach
him/her by sending a notification tone to his/her handset. When the person is engaged in a
call, do as follows:
1 Press "More".
2 Select "Call waiting".
3 Press "Select". The other party hears two short beeps to inform that you want to
reach him/her.
When the line is free, the call on hold is redialed automatically. This is a system dependent
feature.
TIP: It is possible to switch between the calls. See

5.3.13 Switch between Calls

Prerequisite, a new call has been started during conversation, see
during Conversation
1 Press "More" during the call.
2 Select "Switch".
3 Press "Select" to switch to the other call. The first call is on hold.
If needed, repeat the steps above to switch between the calls.

5.3.14 Answer Call Waiting

NOTE: Depending on system setup and configuration, this feature might be handled in one
of two different ways:
Method 1
During an ongoing conversation and a short tone for another incoming call appears, do as
follows:
1 Press the soft key "More" during the call.
2 Select "Answer Call waiting".
18 June 2018 / Ver. K
5 Calling
on page 42.
on page 42.
5.3.6 Start a New Call
5.3.13 Switch between Calls
5.3.6 Start a New Call
TD 92644EN
on page 44.
44