Write New Messages - ASCOM d81 User Manual

User Manual
Ascom d81 DECT Handset
6 Press "More".
7 Select "Save number".
8 Select "Work Number", "Mobile number", or "Other number".
9 Press "Add".
10 Enter name. See
11 Press "OK".
12 Press "Save". The number is saved in the contact list.
7.4.2

Write New Messages

A message can be constructed from scratch, or from a predefined template that can be
used as it is or edited. For additional information about message templates, see
Message Templates
but may be less depending on the character set used.
The first character entered is always upper-case, followed by lower-case character.
However, this may be overridden by pressing the * -key before entering the character.
When pressing a key, the first available character for that key is displayed, see See
Alphanumeric Keys
the key until that character appears in the display.
The keys 0-9, * or # can be used. Keys 0 and 1 contains special characters, see See
Alphanumeric Keys
For example, to enter the character E, press key 3 twice. "E" appears in the display and is
selected after a timeout or when another key is pressed.
TIP: If the system supports UTF-8 character encoding, the input language can be changed
temporarily by long pressing
foreign language.
To delete a character, press "Clear".
To construct and send a message, perform the following steps:
1 Enter the menu by pressing "Menu".
2 Select
3 Select "Write new message".
4 Write the message from scratch or select a message template by pressing the "More"
soft key and, if required, edit the message as described in
on page 93.
NOTE: The "More" key is not displayed if no message templates have been defined.
5 Press "Send".
NOTE: A message can be saved and sent later by pressing the soft key "Back" and
select "Yes". The message is stored under Unsent messages. See
Messages.
6 Enter number, or press
company phonebook.
7 Press "Send".
18 June 2018 / Ver. K
7 Menu Operation
2.1.2 Alphanumeric Keys
on page 92 . The maximum message length is normally 160 characters
on page 14. To enter the other characters supported by the key, press
on page 14 to see all characters.
. This can be used to temporarily access characters in a
in the menu.
to access contacts in the local phonebook and the
on page 14.
11.7.1 The Templates Menu
TD 92644EN
11.7
2.1.2
2.1.2
7.4.3 Unsent
66