Post-Dial With Headset Button; Dial Using Pre-Programmed Keys Or Buttons; Dial A Number From The Call List; Dial Last Called Number With Headset Button - ASCOM d81 User Manual

User Manual
Ascom d81 DECT Handset
5.2.2

Post-Dial with Headset Button

To make a call when a headset is used, press the button to get the ring tone and then dial
the number. The headset button must be configured in the handset via PDM/Device
Manager.
5.2.3

Dial Using Pre-Programmed Keys or Buttons

A Navigation key, Hot key, Soft key, or a headset button can be programmed with a
number. Press the pre-programmed key or button to dial the number. The call is
automatically connected. The headset button must be configured in the handset via a PDM/
Device Manager.
5.2.4

Dial a Number from the Call list

Tip: A number can be dialed from the Call list by pressing
list and pressing "Call" or
1 Open the menu by pressing the "Menu" soft key.
2 Select
3 Select "Call list".
4 Select a number.
5 Press
dialed. Press "More" and select "Edit number". The 25 last received, dialed or missed
calls are stored in a call list. See
5.2.5

Dial Last Called Number with Headset Button

If a headset is used, the headset button can be pressed to dial the last called number. This
requires that the headset button is configured via the PDM/Device Manager.
5.2.6

Dial the Sender of a Message

It is possible to call the sender of a message stored in the message list.
1 Open the menu by pressing the "Menu" soft key.
2 Select
3 Select "Inbox".
4 Select message in the message list.
5 Press "View".
6 Press "More".
7 Select "Call sender".
5.2.7

Dial a Number from the Local Phonebook

1 Open the menu by pressing the "Menu" soft key.
2 Select
3 Select "Call contact".
18 June 2018 / Ver. K
5 Calling
.
.
or the soft key "Call" to dial. The number can be edited before the call is
7.1 Calls
.
.
, selecting a number from the
on page 51.
TD 92644EN
40