Pull Cord; Leather Casing; Headset; Basic Operation - ASCOM d81 User Manual

User Manual
Ascom d81 DECT Handset
2.2.6

Pull Cord

The pull cord is 800 mm long. The pull cord is attached directly to the handset's pull cord
connector on the upper right side.
2.2.7

Leather Casing

The leather casing is especially designed for the handset. The casing comes with a swivel
type belt clip and the handset is fully operational while placed in the casing.
2.2.8

Headset

A headset is recommended if the handset is frequently used and/or if the user wants to
have both hands free. The headset comes in two versions; Microphone on a boom and
Hearing protection.
IMPORTANT: The headset Microphone on a boom is not available as accessory for the EX
To achieve optimal audio quality with the different headset types it is recommended to
select the corresponding headset profile. See
information.
NOTE: When Bluetooth is disabled and having an active call in loudspeaker mode on an EX
classified handset, the audio will not be transferred to the Peltor hearing protection headset
when connecting it.
3

Basic Operation

Tip: For information on how to answering/ending a call, see
3.1

Switch the Handset On and Off

Switch on the Handset
Press and hold
Switch off the Handset
Prerequisite: The handset is in idle mode.
Tip: While in a menu, press
must first be logged out to be able to switch off the handset. See
Shared Phone.
1 Press and hold
2 A Switch off? dialog window is displayed. Confirm by pressing "Yes".
18 June 2018 / Ver. K
3 Basic Operation
classified handset. If used, it is NOT permitted to use the headset in
hazardous area.
until the handset vibrates and the display lights up.
to return to idle mode. If the handset is a shared phone, it
.
7.9.2 Headset on page 82 for more
5.1 Incoming Call
3.2 Log In or Out of a
TD 92644EN
on page 38.
22