Decline A Ptt Invitation; Call A Ptt Group - ASCOM d81 User Manual

User Manual
Ascom d81 DECT Handset
2 Press and hold
muted again when
Invitation Received as Message during an Ongoing Call
If a user receives an invitation during an ongoing call, the call is disconnected and the PTT
call is connected if the following is fulfilled:
• The handset is configured to answer invitations automatically
• The invitation is of higher priority than the call priority
• The user does not reject the invitation within 10 seconds
When the invitation is received, a warning signal notifies the user before disconnecting the
current call to connect the PTT call.
NOTE: Depending on the priority of the invitation, the ongoing call might be disconnected
immediately or after 10 seconds.
If the user rejects the invitation, it can be re-joined later on, see
page 57.
7.1.6

Decline a PTT Invitation

Decline Invitation Received as Incoming Call
Press "Decline", or
shown screen. See also
Decline Invitation Received as Message
Press "Reject" to reject the invitation. The handset returns to the previously shown screen.
See also 7.1.8 Re-join a Group
7.1.7

Call a PTT Group

NOTE: PTT group(s) must be defined in the PDM/Device Manager and Messaging Group(s)
in IMS3/Unite CM to be able to use this function. See the handset's Configuration Manual,
and Installation and Operation Manual for IMS3/Unite CM.
1 Press "Menu".
2 Select
3 Select "PTT groups".
4 Select PTT group.
5 Press "Call", or
TIP: Alternatively, when in idle mode, press
18 June 2018 / Ver. K
7 Menu Operation
to open the microphone for transmitting. The microphone is
is released.
to reject a PTT invitation. The handset returns to the previously
7.1.8 Re-join a Group
on page 57 for more information.
in the menu.
.
7.1.8 Re-join a Group
on page 57.
quickly, select PTT group, and press
TD 92644EN
on
.
56