Add Another Bluetooth Barcode Readers; Select A Bluetooth Barcode Reader; Remove A Bluetooth Barcode Reader; Change The Name Of Bluetooth Barcode Reader - ASCOM d81 User Manual

User Manual
Ascom d81 DECT Handset
4 When the Bluetooth barcode reader is found it is displayed in the Barcode reader
found list. Press the soft key "Select" on the handset to select the Bluetooth barcode
reader. The pairing starts.
5 A PIN-code is requested for the Bluetooth barcode reader. Enter the PIN-code
press "Select" on the handset. Pairing successful is displayed.
6 The paired Bluetooth barcode reader is displayed in the handset menu "Barcode
reader".
B.4.3

Add another Bluetooth Barcode Readers

Up to eight Bluetooth devices can be paired to the handset, but only one at a time can be
selected.
To pair another Bluetooth barcode reader, repeat section
Bluetooth Barcode Reader
The paired Bluetooth barcode readers are displayed by a default name in the handset
menu Barcode reader. See
B.4.4

Select a Bluetooth Barcode Reader

To activate a Bluetooth barcode reader, enter
Barcode reader. Step with the navigation key,
selected and press the soft key "Select". "Connection successful" is displayed. The barcode
reader is now selected.
When a new barcode reader has been selected, any previous barcode reader will
automatically become disconnected.
B.4.5

Remove a Bluetooth Barcode Reader

To remove a Bluetooth barcode reader, enter
> "Barcode reader". Step with the navigation key,
removed and press the soft key "More". Select "Delete". Confirm with the soft key "Yes".
B.4.6

Change the name of Bluetooth Barcode Reader

In the barcode reader list, the name of the barcode reader is the default name for the
barcode reader.
To change the name, enter
with the navigation key,
2.1.2 Alphanumeric Keys
B.5

Barcode Reader Operation

B.5.1

Using the Bluetooth Barcode Reader

The procedure on how to use the Bluetooth barcode reader may vary depending on which
type/model that is used. Refer to the manual for the Bluetooth barcode reader. The
following instruction can be used as a guideline.
1 Press the button (for instructions, see barcode reader manual) of the barcode reader
to scan a barcode. The barcode reader may give a beep to confirm that the barcode
has been read and sends the information the handset.
18 June 2018 / Ver. K
Appendix B. Bluetooth Barcode Reader
on page 119.
B.4.6 Change the name of Bluetooth Barcode
in the menu, select "Bluetooth" > "Barcode reader". Step
and , select the barcode reader. Select More > Edit name. See
on page 14.
B.4.2 Pair and Connect a
in the handset menu, select Bluetooth >
and to the barcode reader to be
in the handset menu, select "Bluetooth"
and to the barcode reader to be
TD 92644EN
1
and
Reader.
120