Switch Between Calls; End A Call During Conversation; Transfer A Call; Transfer To New Call - ASCOM d41 DECT User Manual

User Manual
Ascom d41 DECT Handset
5 Press
6.3.5

Switch between Calls

Prerequisite, a new call has been started during conversation, see
during Conversation
1 Press the "More" Soft key.
2 Select "Switch"
3 Press "Select". This will switch between the calls.
6.3.6

End a Call during Conversation

Prerequisite, a new call has been started during conversation, see
during Conversation
1 Press the "More" soft key during the call.
2 Select "End Call"
3 Press "Select". This will end the current call and the previous call is resumed.
6.3.7

Transfer a Call

Prerequisite, a new call has been started during conversation, see
during Conversation
When a caller has two ongoing calls, he/she can transfer the first call to the second call.
1 Press the "More" soft key.
2 Select "Transfer"
3 Press "Select". This will connect the first caller with the new caller.
6.3.8

Transfer to New Call

An ongoing call can be transferred to a new number. When the new call is established, the
caller that initiated the transfer will be disconnected.
1 Press the "More" soft key during the call.
2 Select "Transfer to new call"
3 Press "Select".
4 Enter number to the person the ongoing call shall be transferred to, or press
to access the phonebook.
5 Press
6.3.9

Conference Call

Prerequisite, a new call has been started during conversation, see
during Conversation
By initiating a conference call, an conversation can be made between several participants
simultaneously.
1 Press the "More" soft key.
1. Only visible if defined in PDM.
2.Visible if the parameters "New Call" and "Transfer" are defined in PDM/IMS3.
21 June 2012 / Ver. G
.
on page 23.
1
.
on page 23.
1
.
on page 23.
1
.
2
.
to transfer the call.
on page 23.
TD 92582EN
6.3.4 Start a New Call
6.3.4 Start a New Call
6.3.4 Start a New Call
6.3.4 Start a New Call
24