ASCOM d81 User Manual page 76

User Manual
Ascom d81 DECT Handset
Set different Ring Signals for Calls
1 Enter the menu by pressing "Menu".
2 Select
3 Select "Sound & Alerts".
4 Select "Ring signals".
5 Different signals for internal calls, external calls, call back and PTT calls can be set.
Select "Internal call", "External call", "Callback", or PTT". The handset has 14 different
ring signals.
NOTE: Additional ring signals might be selectable if they are configured via PDM/Device
Manager. See the handset's Configuration Manual for more information.
6 Press "Back".
Set Alert for Messages
1 Enter the menu by pressing "Menu".
2 Select
3 Select "Sound & Alerts".
4 Select "Message alert".
5 Select the wanted message alert from the list. By pressing "Play" it is possible to
listen to the different alerts.
TIP: The option Custom sound should be selected you want to create an own
message alert. See the handset's Configuration Manual for more information.
NOTE: The "Play" soft key is not available for Enhanced beep and Custom sound.
Instead, send a message to the handset to listen to the sound.
6 Press "Back".
TIP: By default, the message volume follows the ring volume setting, but it is possible to set
another message volume in the handset. See the handset's Configuration Manual for more
information.
Turn the Vibrator On and Off
If the vibrator is activated, the handset vibrates on incoming calls and messages.
TIP: The handset vibrator can also be activated when receiving a message during a call via
PDM/Device Manager. See the handset's Configuration Manual.
NOTE: When the vibrator is enabled on an intrinsically safe handset, the handset alternates
between vibration and sound. That is, vibration and sound are not activated simultaneously.
1 Enter the menu by pressing "Menu".
2 Select
3 Select "Sound & Alerts".
4 Select "Vibrator alert".
5 Select "On", "On if silent" (that is, the vibrator is on when the handset is muted), or
"Off"
18 June 2018 / Ver. K
7 Menu Operation
n the menu.
n the menu.
in the menu.
TD 92644EN
73