ASCOM d81 User Manual page 125

User Manual
Ascom d81 DECT Handset
Pairing fails
Connecting fails/Failed
to connect barcode
reader
Barcode reader can not
connect to handset (see
barcode reader manual
for details on how to
connect)
Other faults/or if the
solutions do not work.
a. Refer to the Manual for the Bluetooth barcode reader
18 June 2018 / Ver. K
Appendix B. Bluetooth Barcode Reader
Barcode reader is not in
pairing mode
Barcode reader is not in
pairing mode
Incorrect PIN entered
Barcode reader is not
turned on
Barcode reader is out of
range
Link key in barcode
reader has been deleted
Barcode reader is
already connected to
another handset
Too close to disturbing
devices.
Handset is not turned on Turn on handset
Bluetooth module is
disabled
Another barcode reader
is already connected to
the handset
Link key is missing in
either barcode reader or
handset.
Too close to disturbing
devices.
Turn barcode reader into pairing
1
mode
Turn barcode reader into pairing/
1
discoverable mode
Try again and enter correct PIN
Turn on barcode reader
Move barcode reader closer to
handset
Repeat pairing procedure
Disconnect barcode reader from
the other handset
Disturbing devices can be WLAN
equipment, microwave etc.
Enable Bluetooth in Bluetooth
menu
Disconnect the connected
barcode reader
Repeat pairing procedure
Disturbing devices can be WLAN
equipment, microwave etc.
1) Switch the handset and barcode
1
reader on/off.
2) Perform a factory reset on the
1
barcode reader .
TD 92644EN
1
1
1
1
122