Clear Lists In Charger; Enhanced Messaging; Receive A Message With Request For Answer; Accept/Reject The Message - ASCOM d81 User Manual

User Manual
Ascom d81 DECT Handset
• DECT location information
• Centralized Management showing online information
• Site Survey Tool for indication of radio signal and base station listing
• Fault logging
• License upgrade menu
• Frequency band selection
• System menu with ability to alter protection
• Factory reset option
For quick access to the Device Information (DI) menu in idle mode, press the keys
containing *#DI# (that is *#34#). For quick access to IPEI/IPDI, press *#06# in idle mode. See
the table below.
Information
Software version
Hardware version
License
IPEI/IPDI
User ID

10.2 Clear Lists in Charger

A parameter can be set using the PDM/Device Manager to clear the messaging and call lists
that have been stored in the handset. When the parameter is activated and the function has
been downloaded to the handset, the lists are deleted when placed in a charger. This can
be useful during administration of handsets for new users. See also the handset's
Configuration Manual.
11

Enhanced Messaging

11.1 Receive a Message with Request for Answer

In the status bar, a message with request for answer is indicated the same way as an
ordinary message, see
In the message list, the message with request for answer is indicated by the icon
11.1.1

Accept/Reject the message

Press the soft key "Accept" or "Reject".
1.This is a license dependent feature.
2.Requires a handset that supports LF location.
3.This option is removed when the frequency band has been set.
18 June 2018 / Ver. K
11 Enhanced Messaging
1
and/or LF location information
3
Code
*#34#
*#34#
*#34#
*#34# or *#06#
*#34#
7.4 Messaging on page 63.
TD 92644EN
2
.
89