Conference Call; Call Back; Send Call Waiting - ASCOM d63 User Manual

User Manual
Ascom d63 DECT Handset

5.4.12 Conference Call

Prerequisite, a new call has been started during conversation, see
during Conversation
NOTE: This option is only visible if configured in the handset. For more information, see the
Configuration Manual for the handset (TD number: See
By initiate a conference call, an conversation can be made between several participants
simultaneously.
1 Press the soft key "More".
2 Select "Conference".
3 Press "Select".
The person initiating the conference call is the conference leader, and the other are
participant members of the conference call.

5.4.13 Call Back

When a call is made to a busy handset, an automatically call back can be made when the
busy handset is free.
NOTE: This option is only visible if configured in the handset. For more information, see the
Configuration Manual for the handset (TD number: See
When a busy tone sounds, do as follows:
1 Press the soft key "More" during the call.
2 Select "Call back".
3 Press "Select".
4 Press
5 When the handset alerts, press

5.4.14 Send Call Waiting

This function is used when a calling party receives a busy signal from a party engaged in a
call and wishes to notify the party that another call is waiting. To notify the engaged party:
1 Press the soft key "More".
2 Select "Call waiting"
3 Press "Select". The engaged party receives a "Call waiting" signal.
When the line is free it automatically calls the number again. This is system dependent.
Note: The "Call waiting" function is only visible if an administrator has activated it in the
handset. For more information, see the Configuration Manual for the handset (TD number:
See 17 Related Documents
28 June 2016 / Ver. PA5
on page 29.
and wait until the handset alerts.
.
on page 91).
5.4.7 Start a New Call
17 Related Documents
17 Related Documents
. The call is started automatically.
TD 93119EN
on page 91).
on page 91).
31