Display Settings - ASCOM d81 User Manual

User Manual
Ascom d81 DECT Handset
7.8.4

Display Settings

Screen Saver
The screen saver can be set to one of the following settings:
• Information: Displays status and identification information while the handset is idle.
• Black: The screen is black when the handset is idle.
• Black also in call: The screen is also black when the handset is in call.
To set the screen saver:
1 Enter the menu by pressing "Menu".
2 Select
3 Select "Display".
4 Select "Screen saver".
5 Select "Information", "Black", or "Black also in call".
6 Press "Back".
NOTE: When charging the handset and the screen saver is shown, no missed calls and
incoming messages are indicated in the display.
When the handset is in a CR3 charging rack, the owner ID and the variant of the handset are
displayed. This simplifies identification when many handsets are charged together.
Brightness
NOTE: An intrinsically safe handset's display brightness is lower than a non-intrinsically safe
handset's display brightness due to current limitations.
1 Enter the menu by pressing "Menu".
2 Select
3 Select "Display".
4 Select "Brightness".
5 Select "Normal" or "Power save".
6 Press "Back".
Contrast
1 Enter the menu by pressing "Menu".
2 Select
3 Select "Display".
4 Select "Contrast".
5 Step with
6 Press "Back".
18 June 2018 / Ver. K
7 Menu Operation
in the menu.
in the menu.
in the menu.
to increase and to decrease the contrast.
TD 92644EN
77