Front Trim Removal / Installation; Inner Panel Removal / Installation - Regency Fireplace Products Greenfire GF900L Owners & Installation Manual

FRONT TRIM REMOVAL / INSTALLATION

1. Remove faceplate, inner door frame, and glass door if already installed - see instructions in this manual.
2. Remove two (2) screws in locations shown below to remove front trim piece.
3. Reverse steps to reinstall.
Front Trim Piece

INNER PANEL REMOVAL / INSTALLATION

1. Remove front trim piece - see instructions above.
2. Remove two (2) screws in locations shown below to release panel clips.
Panel Clip Screw
Regency GF900L-1 Gas Fireplace
Diagram 1 - Front Trim Screw Locations
Locations
Panel Clip
3. Remove panels by sliding out.
4. Reverse steps to reinstall.
installation
39