Damping Material During Transportation - YASKAWA MH180 Operating And Maintenance Manual

Transportation
3.3
NOTICE
Before turning ON the power, check to be sure that the rubber buffer are removed.
After removing the rubber pads, keep them at a safe place. The rubber pads will be required
again if the system is transported again.
The robot is furnished with damping material for transportation (see section A and B in the ).
Housing
1
U-arm
2
-
3 18

Damping material during transportation

A
Fig. 3-1: Damping material during transportation
1
1
2
3
L-arm
3
Mechsnical operation limit
4
4
B