Multi-Channel Sync Hipot Tester 19020/19020-4/19021/19021-4/19022/19022-4
User's Manual
4.4.7 Setting CALIBRATION
In the SYSTEM screen, move the highlighted cursor to CALIBRATION and press ENTER to
go to the CALIBRATION setting screen shown below:
CALIBRATION
CAL. PASSWORD︰■
In the CALIBRATION screen, press the appropriate keys to set the related functions.
The following table lists the parameters in the CALIBRATION menu and their descriptions.
Paramter
Enter into Calibration Mode 7931
Clear the settings and test
procedures in memory
4.4.8 Viewing the ERROR LOG
In the SYSTEM SETUP screen, move the highlighted cursor to ERROR LOG and press
ENTER to go to the ERROR LOG screen shown below:
ERROR LOG
1. +0, No error
The ERROR LOG screen will display any error messages generated during operation. The
ERR box highlight will be turned off upon entering the ERROR LOG screen.
4-14
REMOTE LOCK
Password
Description
Refer to Chapter 7 Calibration Procedure
for related information.
85246
This function will clear all settings and test
procedures in memory and return to factory
default.
REMOTE LOCK
EXIT
CORR
ERROR
EXIT
CORR
ERROR