Multi-Channel Sync Hipot Tester 19020/19020-4/19021/19021-4/19022/19022-4
User's Manual
Enter the PASSWORD and press ENTER, the LOCK box returns to normal indicating the
KEY LOCK is cancelled.
4.4.5 Setting FAIL LOCK
Set FAIL LOCK:
In the SYSTEM screen, move the highlighted cursor to FAIL LOCK and press ENTER to go
to the FAIL LOCK setting screen shown below:
FAIL LOCK
FAIL KEY:
USER PASSWORD:■
1.
Enter the PASSWORD in the FAIL LOCK screen.
2.
When FAIL LOCK is ON, the LOCK text is highlighted to indicate the host is in parameter
FAIL LOCK mode. The "RECALL", "OFFSET", "GET Cs" in [TEST] and "PROGRAM",
"STORE/RECALL" in [MAIN INDEX] as well as the "TEST CONTROL", "SYSTEM
CONFIG", "KEY LOCK", "CHANGE PASSWORD" and "CALIBRATION" in [SYSTEM]
functions cannot be changed.
3.
When FAIL LOCK is set and a test FAILs, all keys are locked except the [CLEAR] and
STOP Function Keys in the TEST screen. Press the [CLEAR] Function Key to enter the
FAIL LOCK password to continue the test.
Release FAIL LOCK:
If LOCK is highlighted in the power on screen, the FAIL LOCK function can be released.
Press SYSTEM to select FAIL LOCK as shown below:
4-12
EXIT
REMOTE LOCK
CORR
ERROR