Parallel Setting - Chroma 63200 Series Quick Start Manual

High Power DC Electronic Load 63200 Series Quick Start Guide
2.3.5

Parallel Setting

Power on the Electronic Load and it will start self test to check the system
as well as the RS-232C and GPIB Interface. The LCD shows:
Next, it will show the CC mode settings.
Press SYS to set the RS485 address of Slave so that it can be followed
when setting the attribute of Master.
First it will prompt the default GPIB address.
Next, press ↓→ to RS485 ADDRESS setting mode. The setting of
RS485 ADDRESS maps to the slave number, for instance if RS485
ADDRESS = 2, the salve number is SLAVE 2. Press 1, ENTER to set
the RS485 ADDRESS to 1.
12
FRONT PANEL TESTING
[ RS232 ]
FRONT PANEL TESTING
CHECKSUM
GPIB ADDRESS
CHROMA ATE INC.
MODEL 632XX
CCHA:
CCHB:
GPIB ADDRESS
PASS
PASS
X
0.0000A
0.0000A
X