Setting Calibration; Setting Error Log - Chroma 19020 User Manual

Multi-Channel Sync Hipot Tester 19020/19020-4/19021/19021-4/19022/19022-4
User's Manual

4.4.7 Setting CALIBRATION

In SYSTEM screen, move the highlight to CALIBRATION and press ENTER to go to
CALIBRATION setting screen as shown below:
CALIBRATION
CAL. PASSWORD︰■
When in CALIBRATION screen, press keys to set the related functions.
The following table lists the setting items of CALIBRATION and their descriptions.
Setting Items
Enter into Calibration Mode 7931
Clear the settings and test
procedures in memory

4.4.8 Setting ERROR LOG

In SYSTEM SETUP screen, move the highlight to ERROR LOG and press ENTER to go to
ERROR LOG screen as shown below:
ERROR LOG
1. +0，No error
When in ERROR LOG screen it will show the error message generated during connection.
The ERR box will return to normal without reverse when in ERROR LOG screen.
4-14
REMOTE LOCK
Password Description
Please refer to Chapter 7 Calibration
Procedure for related info.
85246 This function will clear all settings and test
procedures in memory and return to factory
default.
REMOTE LOCK
EXIT
CORR ERROR
EXIT
CORR ERROR