7.1 Entering Calibration Screen
In the SYSTEM screen, move the highlighted cursor to CALIBRATION and press ENTER to
go to the CALIBRATION setting screen shown below:
CHANGE PASSWORD
CAL. PASSWORD︰■
Key-in the calibration password 7 9 3 1 to enter the calibration mode.
7.2 Selecting the Channel for Calibration
CALIBRATION
A/D REFERENCE
CHANNEL: 1
VOLTAGE
1.500V
Use the [NEXT CH] and [PREV CH] Function Keys to select the channel to be calibrated and
the display will show the channel under calibration.
REMOTE LOCK
CURRENT
1.500V
REMOTE LOCK
Calibration Procedure
EXIT
CORR
ERROR
NEXT CH
PREV CH
CORR
ERROR
7-3