Table of Contents
Advertisement
1.
2.
4.4.4 Setting KEY LOCK
In the SYSTEM screen, move the highlighted cursor to KEY LOCK and press ENTER to go to
the KEY LOCK setting screen shown below:
KEY LOCK
LOCK KEY:
USER PASSWORD:■
1.
Enter the PASSWORD in the KEY LOCK screen. (The default is 0 0 0 0.)
2.
Pressing ENTER will display a selection window to lock/unlock RECALL MEMORY. Use
the [YES], [NO] Function Keys to lock/unlock the MEMORY RECALL as well.
3.
When KEY LOCK is ON, the LOCK text is highlighted to indicate the host is in parameter
protection mode. The "OFFSET", "GET Cs", "CLEAR" in [TEST] and "PROGRAM",
"STORE" in [MAIN INDEX] as well as the "TEST CONTROL", "SYSTEM CONFIG",
"FAIL LOCK", "CHANGE PASSWORD" and "CALIBRATION" in [SYSTEM] functions
cannot be changed.
4.
When setting KEY LOCK, if RECALL LOCK ON is selected, the MEMORY RECALL
function is also locked.
KEY LOCK Release:
If LOCK is highlighted in the power on screen, the KEY LOCK function can be cancelled.
Press SYSTEM to select KEY LOCK as shown below:
KEY LOCK
UNLOCK KEY:
USER PASSWORD:■
When LINK SETUP is set to SLAVE in the SYSTEM screen, "02.
SYSTEM CONFIG", "05. CHANGE PASSWORD", "06.
CALIBRATION", "07. ERROR LOG" and "08. ABOUT" are active.
The remaining items cannot be changed.
Only the 19020/19020-04 LINK SETUP settings have a SCANNER
selection.
REMOTE LOCK
REMOTE
EXIT
CORR
ERROR
EXIT
LOCK
CORR
ERROR
Operation
4-11
Advertisement
Table of Contents
