Stb; Sav - ITech IT6500C Series Manual

Default set
Refer to *PSC command
Example
*SRE 128
Query syntax
*SRE?
Returns
<NR1>
Related Command
*ESE *ESR? *PSC *STB?

*STB

This command can read the data from status byte register. After execute this
command, the value of bit6 in status byte register will be clean.
Bit
Position
Condition
The Arguments description in table as follow:






Query syntax
*STB?
Arguments
None
Returns
<NR1>
Related Command
*CLS *ESE *ESR

*SAV

This command can save the current setups of power supply to specified
memory. These setups contains current setups, voltage setups, max voltage
7 6
OPER RQS
OPER: Operation status summary
RQS: Request service
ESB: Event status summary
MAV: Message is enabled
uery status register position.
QUES: EQ
EAV: Error message is enabled.
Copyright© Itech Electronics Co., Ltd.
5 4 3
ESB MAV QUES EAV Not used
IEEE-488 Commands
2 1 0
Not Used
113