Load:power:fall[:Level]; Load:power:protection:state - ITech IT6500C Series Manual

Returns
NRf

LOAD:POWer:FALL[:LEVel]

This command is used to set falling time for load power.
Command syntax
LOAD:POWer:FALL[:LEVel]
Arguments
MINimum|MAXimum|NRf
Unit
S
Reset Value
0.001
Example
LOAD:POW:FALL 0.2
Query syntax
LOAD:POWer:FALL[:LEVel]? [MINimum|MAXimum]
Returns
NRf

LOAD:POWer:PROTection:STATe

This command is used to set over power protect state.
Command syntax
LOAD:POWer:PROTection:STATe <bool>
Arguments
ON|OFF|1|0
Reset Value
1
Example
LOAD:POW:PROT:STAT 1
Query syntax
[SOURce:]POWer:PROTection:STATe?
Copyright© Itech Electronics Co., Ltd.
Load Related Command（IT6500C）
58