Stb; Trg - ITech CalPower IT6302 Programming Manual

byte will set RQS of state byte register to 1. Bit definition of state byte enable
register is as the same as the state byte register.
Command syntax
*SRE <NRf>
Arguments
0~255
Default set
Refer to *PSC command
Example
*SRE 128
Query syntax
*SRE?
Returns
<NR1>
Related Command
*ESE *ESR? *PSC

*STB?

This command can read the data from status byte register. After execute this
command, the value of bit6 in status byte register will be clean.
Query syntax
*STB?
Arguments
None
Returns
<NR1>
Related Command
*CLS *ESE *ESR

*TRG

When the trigger mode of the power supply is BUS order trigger mode, the
order will
TRIGger[:IMMediate].
Generates a trigger signal. The function is the same as
Copyright© Itech Electronics Co., Ltd.
39