Calibrate:program:voltage[:Data]; Calibrate:program:current:level; Calibrate:program:current[:Data] - ITech IT6500C Series Manual

Arguments
P0|P1
Example
CAL:PROG:VOLT:LEV P0

CALibrate:PROGram:VOLTage[:DATA]

This command is used to set calibration data of program voltage.
Command syntax
CALibrate:PROGram:VOLTage[:DATA] <NRf>
Arguments
NRf
Unit
V
Example
CAL:PROG:VOLT 24.0V

CALibrate:PROGram:CURRent:LEVel

This command is used to set calibration point of program current.
Command syntax
CALibrate:PROGram:CURRent:LEVel <P0|P1>
Arguments
P0|P1
Example
CAL:PROG:CURR:LEV P0

CALibrate:PROGram:CURRent[:DATA]

This command is used to set calibration data of program current.
Command syntax
CALibrate:PROGram:CURRent[:DATA] <NRf>
Arguments
NRf
Unit
A
Copyright© Itech Electronics Co., Ltd.
Calibration Command
100