Chapter6 Input Measuring Commands; Measure[:Scalar]:Voltage[:Dc]; Fetch[:Scalar]:Voltage[:Dc]; Measure[:Scalar]:Current[:Dc] - ITech IT6500C Series Manual

Chapter6 Input Measuring Commands

MEASure[:SCALar]:VOLTage[:DC]?

This command is used to enquire the actual output voltage.
Command syntax
MEASure[:SCALar]:VOLTage[:DC]?
Arguments
None
Returns
〈NRf〉
Unit
V
Example
MEAS:VOLT?

FETCh[:SCALar]:VOLTage[:DC]?

This command is used to fetch the DC voltage value in buffer.
Command syntax
FETCh[:SCALar]:VOLTage[:DC]?
Returns
<NRf>
Unit
V

MEASure[:SCALar]:CURRent[:DC]?

This command is used to enquire the latest DC current value.
Command syntax
MEASure[:SCALar]:CURRent[:DC]?
Arguments
None
Returns
<NRf>
Copyright© Itech Electronics Co., Ltd.
Input Measuring Commands
26