Sequence[:Step]:Slope; Sequence:save - ITech IT6500C Series Manual

SEQuence[:STEP]:SLOPe

This command is used to edit the slope of a specified step of the wave
file.
Command syntax
SEQuence[:STEP]:SLOPe <NR1>,MINimum|MAXimum|NRf
Arguments
<NR1>,MINimum|MAXimum|NRf
Unit
s
Example
SEQ:SLOP 1,4
Query syntax
SEQuence[:STEP]:SLOPe? <NR1>,[MINimum|MAXimum]
Returns
NRf

SEQuence:SAVe

This command is used to save the wave file.
Command syntax
SEQuence:SAVe <NR1>
Arguments
<1~100>
Example
SEQ:SAV 1
Copyright© Itech Electronics Co., Ltd.
Wave Operation Command
68