Carwave:iso16750:Reset[:State]; Carwave:iso16750:Reset:voltage[:Level] - ITech IT6500C Series Manual

Returns
<CRD>

CARWave:ISO16750:RESet[:STATe]

This command is used to analog ISO reset wave of car.
Command syntax
CARWave:ISO16750:RESet <bool>
Arguments
ON|OFF|1|0
Reset Value
0
Example
CARWave:ISO16750:RES 1
Query syntax
CARWave:ISO16750:RESet?
Returns
0|1

CARWave:ISO16750:RESet:VOLTage[:LEVel]

This command is used to set minimum supply voltage of ISO reset wave of car
Command syntax
CARWave:ISO16750:RESet:VOLTage <value>
Arguments
MINimum|MAXimum|NR3
Reset Value
12
Example
CARW:ISO16750:RES:VOLT 5.0 , CARW:ISO16750:RES:VOLT? MAX
Query syntax
CARWave:ISO16750:RESet:VOLTage? [MINimum|MAXimum]
Returns
NR3
Copyright© Itech Electronics Co., Ltd.
Car Wave Command（IT6500C）
70