[Source:]Extern:monitor:range; [Source:]Extern:program:mode - ITech IT6500C Series Manual

Command syntax
[SOURce:]EXTern[:STATe] <bool>
Arguments
ON|OFF|1|0
Reset Value
0
Example
EXT 1
Query syntax
[SOURce:]EXTern[:STATe]?
Returns
0|1

[SOURce:]EXTern:MONitor:RANGe

This command is used to set output range of external monitor.
Command syntax
[SOURce:]EXTern:MONitor:RANGe <10V|5V>
Arguments
10V|5V
Reset Value
10V
Example
EXT:MON:RANG 5V
Query syntax
[SOURce:]EXTern:MONitor:RANGe?
Returns
10V|5V

[SOURce:]EXTern:PROGram:MODE

This command is used to set external program mode.
Command syntax
[SOURce:]EXTern:PROGram:MODE <VOLTage| RESistance>
Copyright© Itech Electronics Co., Ltd.
Output Commands
43