Carwave:sae[:Test]:5:Voltage[:Level]; Carwave:lv124:E02[:State]; Carwave:lv124:E04[:State] - ITech IT6500C Series Manual

CARWave:SAE[:TEST]:5:VOLTage[:LEVel]

This command is used to set voltage system of SAEJ1113-11 TEST 5
Command syntax
CARWave:SAE:5:VOLT < 12V|24V >
Arguments
12V|24V
Reset Value
12V
Example
CARWave:SAE:5:VOLT 12V
Query syntax
CARWave:SAE:5:VOLT?
Returns
<CRD>

CARWave:LV124:E02[:STATe]

This command is used to simulate LV124 E02 wave.
Command syntax
CARWave:LV124:E02 <bool>
Arguments
ON|OFF|1|0
Reset Value
0
Example
CARWave:LV124:E02 1
Query syntax
CARWave:LV124:E02?
Returns
0|1

CARWave:LV124:E04[:STATe]

This command is used to simulate LV124 E04.
Copyright© Itech Electronics Co., Ltd.
Car Wave Command（IT6500C）
86