System:communicate:lan:dhcp[:State]; System:communicate:lan:socketport - ITech IT6500C Series Manual

Returns
<STR>

SYSTem:COMMunicate:LAN:DHCP[:STATe]

This command is used to set Dynamic IP address of power supply.
Command syntax
SYSTem:COMMunicate:LAN:DHCP[:STATe] <bool>
Arguments
0|1|OFF|ON
Reset Value
0
Example
SYST:COMM:LAN:DHCP 1
Query syntax
SYSTem:COMMunicate:LAN:DHCP[:STATe]?
Returns
0|1

SYSTem:COMMunicate:LAN:SOCKetport

This command is used to set socket port of communication.
Command syntax
SYSTem:COMMunicate:LAN:SOCKetport <NR1>
Arguments
<NR1>
Unit
None
*RST 值
30000
Query syntax
SYSTem:COMMunicate:LAN:SOCKetport?
Returns
<NR1>
Copyright© Itech Electronics Co., Ltd.
SCPI Command Description
21