Carwave:iso21848:Reset:voltage[:Level]; Carwave:iso21848:Startup:profile[:State] - ITech IT6500C Series Manual

Example
CARWave:ISO21848:RES 1
Query syntax
CARWave:ISO21848:RESet[:STATe]?
Returns
0|1

CARWave:ISO21848:RESet:VOLTage[:LEVel]

This command is used to set minimum supply voltage of ISO21848 reset wave
of car
Command syntax
CARWave: ISO21848:RESet:VOLTage[:LEVel]
Arguments
MINimum|MAXimum|NR3
Reset Value
0.0
Example
CARW:ISO21848:RES:VOLT 5.0 , CARW:ISO21848:RES:VOLT? MAX
Query syntax
CARWave:ISO21848:RESet:VOLTage[:LEVel]? [MINimum|MAXimum]
Returns
NR3

CARWave:ISO21848:STARtup:PROFile[:STATe]

This command is used to analog ISO21848 startup wave of car.
Command syntax
CARWave:ISO21848:STARtup:PROFile[:STATe] 0|1
Arguments
0|1
Reset Value
0
Example
CARWave:ISO21848:STARtup:PROFile 1
Copyright© Itech Electronics Co., Ltd.
Car Wave Command（IT6500C）
75