Chapter7 Output Commands; [Source:]Current[:Level][:Immediate][:Amplitude]; [Source:]Current:minimum[:Level] - ITech IT6500C Series Manual

[SOURce:]CURRent[:LEVel][:IMMediate][:AMPLitude]

This command is used to set the output current value.
Command syntax
[SOURce:]CURRent[:LEVel][:IMMediate][:AMPLitude]<MINimum|MAXimum|N
Rf>
Arguments
MINimum|MAXimum|NRf
Unit
A
Reset Value
0.5 (The reset value of different models are different)
Example
CURR 2.0
Query syntax
[SOURce:]CURRent[:LEVel][:IMMediate][:AMPLitude]? [MINimum|MAXimum]
Returns
NRf

[SOURce:]CURRent:MINimum[:LEVel]

This command is used to set the minimum value of current.
Command syntax
[SOURce:]CURRent:MINimum[:LEVel] <MINimum|MAXimum|NRf>
Arguments
MINimum|MAXimum|NRf
Unit
A
Reset Value
0.0
Example
CURR:MIN 0.0

Chapter7 Output Commands

Copyright© Itech Electronics Co., Ltd.
Output Commands
29