Notifier ID50 Installation, Commissioning & Configuration Manual page 49

ID50 Series Panel - Installation, Commissioning & Configuration Manual
1
or
2 8
6
5
EN54-2 : 7.6.1, 7.8, 8.7.1
Level 1 Control Key
access is NOT EN54
compliant
1
or
2 8
6
5.5.10 Site Name
The Site Name option allows the entry of up to
20 characters to replace the ‘Status: NORMAL’ display
on the LCD. To edit/change the characters:
1 From the Commissioning menu, press the ‘
on the numeric keypad to enter the Setup menu.
[Setup] Language =
> : Change
2 Press the ‘ /
2
menus until the LCD displays the Site Name menu.
[Setup] Name = < blank/existing text >
> : Change
3 To edit/change the site name, press the ‘
The LCD display is replaced by a text editing menu
with the existing 20-characters of text on the upper
line. The current cursor position is indicated by a
flashing character.
Note: For further information on how to edit text, refer to
Section 5.8, Zone Texts.
[
> : Next < : Previous
4 Using the appropriate buttons, edit the text then
confirm the new text using the ‘
returns to the Site Name menu.
[Setup] Name = < blank/existing text >
> : Change
5 Press ‘ ’ to return to the Commissioning menu. All
4
changes are saved on exiting.
5.5.11 Control Keys
The Control Keys option allows the access level at which
the panel control keys can be operated to be changed.
To select the access level:
1 From the Commissioning menu, using the numeric
keypad press the ‘
[Setup] Language =
> : Change
2 Press the ‘ /
2
menus until the Control Keys menu is displayed.
[Setup] Control Keys Access Level = 2
> : Change
3 Press the ‘ ’ button to change the setting to level 1
6
(no passcode) or level 2 (user passcode).
4 Press ‘ ’ to return to the Commissioning menu. All
4
changes will be saved on exiting.
43
English
× : More < : Exit
’ buttons to step through the Setup
8
× : More < : Exit
3
] × : Char : Done
u1:Delete u3:Insert
’ button. The LCD
5
× : More < : Exit
’ button to enter the Setup menu.
1
English
× : More < : Exit
’ buttons to step through the Setup
8
× : More < : Exit
997-263, Issue 4
September 2002
’ button
1
’ button.
6