Pulse In Measuring Inputs (Sensor 1 / 2); Outputs; Data Interface; Current Loop Connection - RMG TME400-VM VMF Series Operating Manual

Pulse In measuring inputs (sensor 1 / 2)

5.1.2.2.
Note
For Ex connection values, see approval.

Outputs

5.1.3.
Non-Ex
U
min
U (U )
max i
I
max
For use of the TME400 in hazardous areas the values for the HF, LF and alarm out-
put must be taken from the ATEX certificate.
5.1.4.

Data interface

RS-485 data interface
U
ext
For use of the TME400 in hazardous areas the values must be taken from the ATEX
certificate.
Note
When using the RS485 interface, the device must be supplied with power via
U .
ext
Note
In an Ex version, the connection must only be made to a certified, intrinsic
safe current circuit.
The Ex-relevant connection values are specified in the approval.
5.1.5.

Current loop connection

Current loop connection
5 V
30 V
100 mA
6.0 – 24 V
5 Technical data
Manual TME400-VMF · EN07 · December, 7
71
th
2020