RMG TME400-VM VMF Series Operating Manual page 30

1 Introduction
DN
50 2"
80 3"
100 4"
24
150 6"
200 8"
250 10"
300 12"
400 16"
500 20"
600 24"
Note
When flange seals which protrude into the pipeline are used for turbine me-
ters, the measuring accuracy can be influenced negatively. Ensure that the
flange seals do not protrude beyond the seal surfaces into the pipeline.
Danger
Gas escape due to incorrect seal
If incorrect flange seals are used for the assembly of turbines, an explosive
gas mixture can form due to leaks.
Danger of poisoning and explosion!
In addition, the stress on the flange is increased to an impermissible level
when tightening the thread bolts.
Ensure secure fastening/attachment of the TME400 during assembly in order
to avoid crushing. Ensure that you keep your fingers (or other body parts)
away from these openings and gaps when pulling the flanges together.
Manual TME400-VMF · EN07 · December, 7
ANSI 300
d1 d2 d3
51 69.9 85.9
81 101.6 120.7
106.4 127.0 149.4
157.2 182.6 209.6
215.9 233.4 263.7
268.3 287.3 317.5
317.5 339.9 374.7
400 422.4 463.6
500 525.5 577.9
603.3 628.7 685.8
th
2020
PN 64
d1 d2 d3
54 66 84
86 95 119
108 120 144
162 174 200
213 225 257
267 279 315
318 330 366
414 426 466
518 530 574
618 630 674
ANSI 600
d1 d2
51 69.9 85.9
81 101.6 120.7
106.4 120.7 149.4
157.2 174.8 209.6
215.9 225.6 263.7
268.3 274.6 317.5
317.5 327.2 374.7
400 412.8 463.6
500 520.7 577.9
603.3 628.7 685.8