Operation; Operation Concept; Coordinate System - RMG TME400-VM VMF Series Operating Manual

4 Operation

4. Operation

4.1. Operation concept

51
Figure 11: Front panel
The concept of the operation is simple and easy to implement with knowledge of the
coordinates.

Coordinate system

4.1.1.
All configuration data, measurements and computed values are sorted in a table in a
coordinate system which enables easy access. The coordinate system is divided into
several columns, as shown on, in part, on the front panel (see top and bottom).
th
Manual TME400-VMF · EN07 · December, 7 2020