RMG TME400-VM VMF Series Operating Manual page 85

E 9 X:Y pulse comparison error
E 10 Max. output pulse error
E 11 Current output error
E 12 Error CRC Calibration Parameter
W 101 Warning Battery Capacity low
H 201 New software version
H 202 Metrology switch open
H 203 Code word set
6 Error messages
Check the alarm setting for the pulse
comparison.
Check the alarm setting for the max.
output pulse.
Check your current connections.
Contact RMG service in case of
uncertainty.
Contact RMG service.
Please change the battery
You have a new firmware version
Metrology switch open
Code word is set
Manual TME400-VMF · EN07 · December, 7
79
th
2020