RMG TME400-VM VMF Series Operating Manual page 55

Danger
The battery must only be replaced in a non-explosive atmosphere. Ensure
that the electronics are supplied with adequate ventilation with fresh air.
Note
The battery can be changed during operation.
•
All readings of the counter(s) and all counting parameters are retained.
•
After changing the battery, the current time and date must be entered
again (coordinates X01 and X02; see chapter 4.3.3.6 Archive ). In addition,
the battery change must be indicated in coordinate G25. This updates
the battery change date and sets the operating hours G26 to 0 and the
battery capacity G24 to 100 %.
•
The current flow rate value is not stored during the change because
there is no additional battery buffering.
Figure 10: Battery holder
Manual TME400-VMF · EN07 · December, 7
3 TME400
49
th
2020