Hako System Maintenance - HAKO Scrubmaster B400 R Service Booklet

Hako system maintenance

Hako system maintenance
Attention
Before undertaking maintenance work, read and observe the safety
instructions in the operating manual!
The Hako system maintenance specifies in single modules the special
technical work to be done and the periods of time for the maintenance
activities. Parts to be replaced for the individual maintenance tasks are
determined.
Hako system maintenance:
• Assures the reliable readiness for use of the Hako cleaning machines
(preventive maintenance).
• Minimises operating costs, repair costs, costs for maintenance.
• Assures long life and readiness for use of the machine.
Hako system maintenance I (every 250 hours):
Performance by an expert of an authorised Hako workshop by reference to
the machine-specific system maintenance.
Hako system maintenance II (every 500 hours):
Performance by an expert of an authorised Hako workshop by reference to
the machine-specific system maintenance.
Hako system maintenance III/S (every 1000 hours/safety check):
Performance by an expert of an authorised Hako workshop by reference to the
machine-specific system maintenance at least once a year. Performance of all
legally stipulated safety-relevant tests according to the BGV specifications.
Machine data
Your machine is described clearly by the following data.
•
Machine type:
•
Manufacturing no.:
•
Start-up on:
Your nearest authorised Hako dealer:
•
Address:
•
Telephone:
2
B400 R (7190)