Maintenance and Servicing
5.7
Wiper
Fig. 40:
5.7.1
Swinging down the wiper
In order to change the brushes, raise the wiper Fig. 40-9 at the handle and
swing it to the side.
When raised, the wiper can be fixed into position with the locking lever
Fig. 39-A.
5.7.2
Replacing the rubber of the wiper
Check the rubber of the wiper weekly for wear, turn or replace the rubber if
necessary.
1. Loosen the wing nut Fig. 40-B.
2. Remove the clamping band Fig. 40-C.
3. Turn the rubber of the wiper (can be used 4 times) or replace it.
4. Assembly is in reverse order.
78
9
C
B
A
05-7177-00.fm