How To Mount The Stabilizer; Replace Wiper - HAKO Hakomatic B 650 R Instruction Manual

8. Maintenance and service
8.6 Tank stabilizer
Tank stabilizer
1 Washer
2 Hex. bolt
3 Hex. nut
4 Hex. nut
5 Pressure plate
6 Stay

How to mount the stabilizer

q Before fitting plate to measure X at
the stbilizer, pre-mount to 20 mm
q Mount complete stabilizer (XVI/6) in
the tank and fasten hand-tight by
means of (XVI/1 and 2)
q Fasten plate (XVI/5) hand-tight at
tank wall and determine X
q Adjust tension of plate (XVI/5)
to X + 4mm
q
Tighten (XVI/2)
q Fasten (counter-lock) plate (XVI/5)
by means of (XVI/4)

8.7 Replace wiper

q
Loosen wing nut (XVII/1)
q Push clamping strip (XVII/2) untill
the hooks are free and the clamping
XVI
strip can be removed.
q Change wiper (XVII/3).
q
Proceed to mounting in inverse
order.
Wiper right
1 Wing nut
2 Clamping strip
3 Wiper rubber
4 Bolting device anchor
Hinge the locking (XVII/4)
when changing the wiper.
XVII
37