Run The Cleaning Card - Entrust EM1 User Manual

3.
Load the cleaning card into the input hopper.
If the cleaning card appears bowed, insert it as
shown.
4.
Close the input hopper.
5.
Log in to Printer Dashboard using a user account and access the homepage.
6.
Continue with

Run the Cleaning Card

Use Printer Dashboard to start the cleaning cycle.
1.
At the homepage of Printer Dashboard, click Cleaning Card.
The card is run through the printer and placed in the output hopper.
2.
Remove the used cleaning card.
3.
Continue with
EM1, EM2 Card Printers User's Guide
Card Without Bow
Card With Bow
"Run the Cleaning Card".
"Prepare the Printer for Use" on page 28.
27