Run The Cleaning Card - Entrust Sigma Series Cleaning Manual

Sigma Series

Run the Cleaning Card

1. Use the LCD panel to run the isopropanol cleaning card.
1
2
3
When the cleaning cycle completes:
If the printer does not have locks: The isopropanol cleaning
ƒ
card is ejected into the output hopper. Remove and discard
the cleaning card.
If the printer has locks: The isopropanol cleaning card is
ƒ
placed in the printer reject tray (RT1). It can remain in the
reject tray until the next time the tray is emptied.
2. Continue with
8
"Prepare the Printer for Use" on page
4
5
6
9.
528293-001_B