Reverse Direction Of Rotations; Camera Settings - Fanotec MECHA C2 User Manual

Reverse Direction of Rotations

Switch the 1 - 2 motor cables — Check this checkbox if, for some reasons, you
want to connect the top cable of the controller to the lower rotator, and the
bottom cable of the controller to the upper rotator.
Switch the Up - Down rotation when done by MECHA's buttons — Check this
checkbox if you want to change the sense of up/down rotation when it is
done manually using the
Switch the Left - Right rotation when done by MECHA's buttons — Check this
checkbox if you want to change the sense of left/right rotation when it is
done manually using the

Camera Settings

Camera is in Portrait Orientation — This checkbox is checked by default. You
can uncheck it if you want to specify that the camera is in landscape
orientation. For example, if the number of shots around is 35mm or 35mm2,
via custom, the shooting pattern will be computed considering the camera
orientation.
Preferred MSS pattern — This is how you want the MSS scripts to be produced
automatically. By default it is SL,MDU,ZZ,NN.
Any MSS script consists of three parts, the first part refers to the starting
position (SL – Start Level, in our case), and the third, to the number of
images for zenith and nadir (ZZ, NN – 2 zeniths, 2 nadirs). MECHA will
replace the middle part (MDU) with the computed script.
For example, if you want Start Parked instead of Start Level, and a single
Zenith photo instead of two, and a pause before the first row, the Preferred
MSS Pattern should be: SP,PMDU,Z,NN
MECHA C2 User's Guide v.02.5
\ /
, buttons. The equivalent of 2323< code.
< >
, buttons. The equivalent of 2313< code.
© 2021 FANOTEC
65