Table of Contents
Advertisement
○ When MECHA runs a preset and is paused, you can press
on IR Remote, or [PAUSE/NEXT] on UI, to continue to the next position.
○ If, instead,
to the next position and switches on/off the step by step mode.
The above allows both:
1. Starting a preset in step by step, then switch off step by step when it is
not needed, thus the preset will continue automatically.
2. If a preset is paused by remote/UI/script, then pressing
and switch on/off the step by step.
A possible application is a spherical panorama with certain areas
needing to be done step by step, and which areas depends on the events
on the field.
During the pause, pressing
will trigger the number of shots specified by [TRG] in presets.
This can be used for extra shots for a particular position.
● [STOP] — Emergency stop.
● Presets list — This list contains all the presets, both those created and
those downloaded from the server.
○ The names of the presets downloaded from the server start with (s),
which means they are not saved yet. You can load and save the
presets you want to keep.
○ The option More from Server... allows you to download presets from
the server.
● [Load] button — Loads the preset selected from the Presets list. In our
example, the current preset is sa_7shots.
● [Save] button — Allows you to save the current preset with the same
name (overwrite), or with a different name.
● [Rename] button — Allows you to rename the selected preset.
● [Delete] button — Deletes the selected preset.
MECHA C2 User's Guide v.02.5
<
is pressed on C2 or on IR Remote, MECHA will continue
S
on IR Remote, or [SHOOT] on UI, MECHA
© 2021 FANOTEC
>
:
, or
<
will advance
56
Advertisement
Table of Contents
