Table of Contents
Advertisement
● [Reboot] button — Restarts MECHA, similar to
restarting a computer.
● Default page at start — MECHA's home page, or
start page, can be one of the following pages:
Row, Ring, or New (like in our example). Select the
desired option from the list.
● Volume of Beeps — A value from 0 to 250, and can
be entered via Custom, or select another option
from the list.
● Power Saving Mode — A list of options to set
MECHA to shut down automatically after a
certain number of minutes of inactivity, or vice
versa, to keep it always on. The setting for this
field can be done on the Configuration page, in
which case it has priority over other options, and
is displayed on a gray background.
● [Go to Ring] button — Accesses the Ring page, and
alternates with [Go to Row].
● [Shut Down] button — Shuts down MECHA in 20
seconds. Press [Cancel] or [Stop] to cancel.
●
[Connect to Wi-Fi] button — Initiates the
process of connecting to a Wi-Fi network to
use MECHA in STA (Station) mode or for
firmware update. Available networks are
displayed as in the image shown on the
right. If you have successfully connected to
one of the networks in the list, it is
displayed on a gray background and you
can connect to it using the stored password
instead of typing it.
MECHA will show the connection status on
the display when trying to connect to Wi-Fi
in STA or AP+STA mode. The process can be stopped by pressing the
button if you know that the targeted Wi-Fi is not in range.
● [Wi-Fi Off] button — Turns Wi-Fi OFF. It needs power cycling to have it ON
again.
● [More or Less...] button — Shows more or less settings.
MECHA C2 User's Guide v.02.5
© 2021 FANOTEC
P
58
Advertisement
Table of Contents
