Table of Contents
Advertisement
● [N x LEFT] button — Shoots & rotates counterclockwise for N positions
with the degrees interval specified above, regardless of the number of
shots specified in the Shots field.
For example, if you want to take 3 shots 45° apart to the left, set the
degrees of rotation to 45°, and the number of positions to 3, as in the
image below, and click the [3 x LEFT] button.
● [Shoot] button — Shoots the number of photos in a set for a single
position. In our example, 1 photo (1 TRG) is taken. Use this feature when
you want to take some photos in a certain position, without any rotation.
● [N x RIGHT] button — The same as [N x LEFT], but the shooting and
rotation are done clockwise.
● [Cancel] button — Executes a smooth stop and a rewind to the initial
position, where the preset has started.
● [PAUSE] button — Pauses the current running preset. Click/tap again this
button to continue.
○ The 21< code switches MECHA to or off pause mode, the same as
clicking the [Pause] button on UI, or on IR Remote.
○ While MECHA is in pause mode, the text „PAUSE" is shown on C2's
display.
○ If MECHA is in pause mode and a preset is started, MECHA will pause
before every position, resulting in step by step movement, and the
text „STEP BY STEP" is shown on C2's display.
MECHA C2 User's Guide v.02.5
© 2021 FANOTEC
55
Advertisement
Table of Contents
