Fanotec MECHA C2 User Manual page 17

1. For the lower rotator
● For 45° rotations:
<
○ Press then quickly press
>
○ Press then quickly press
● For 90° rotations:
<
○ Press then quickly press
>
○ Press then quickly press
● For 180° rotations:
<
○ Press then quickly press
>
○ Press then quickly press
2. For the upper rotator do the same, but use the up and down buttons
instead of the left and right buttons:
● For 45° rotations:
\
○ Press then quickly press
/
○ Press then quickly press
● For 90° rotations:
\
○ Press then quickly press
/
○ Press then quickly press
● For 180° rotations:
\
○ Press then quickly press
/
○ Press then quickly press
Note that the rotation angle for the above button combinations can be
set in the Config Menu or on the Configuration page.
3. For continuous rotation press and hold the arrow buttons, one at a
time. For example, for continuous left rotation, press and hold
MECHA C2 User's Guide v.02.5
-
.
-
, for the opposite direction.
+
.
+
, for the opposite direction.
=
.
=
, for the opposite direction.
-
.
-
, for the opposite direction.
+
.
+
, for the opposite direction.
=
.
=
, for the opposite direction.
© 2021 FANOTEC
<
.
17