Table of Contents
Advertisement
Reset options
● RESET CONFIG. TO DEFAULT ! — Resets the configuration settings to their
default values, for example: SSID password → 12345678, Password for
Configuration page → Mecha, Hot-Spot password for firmware update
→ 87654321, Default Mode → AP.
● FACTORY RESET ! — Will restore your MECHA to its original factory
settings.
S
Press the
button to start the reset procedure and follow the intructions
on the display:
○ After a few seconds, you are asked to repeat the step above, so
press again the
display.
○ Then the power button symbol start flashing on the display, which
means you have to press the
procedure is completed.
● QUIET ‒ LOUD BEEP — Press the
options.
MECHA C2 User's Guide v.02.5
S
button when the reset option appears on the
P
button, and wait until the reset
S
button to switch between the two
© 2021 FANOTEC
42
Advertisement
Table of Contents
