● After 10 seconds, MECHA starts to rotate slowly to the right, and you
have to press the
camera's view, as stated in the message.
● Then MECHA goes back to the initial position and starts to slowly tilt
down, and you have to press again the
is out of the camera's view.
● Then MECHA goes back to the initial position and the computed presset
can be used. So press the
use any other preset.
MECHA C2 User's Guide v.02.5
P
button when the target object is out of the
S
button to launch it, or use it later as you
© 2021 FANOTEC
P
button when the target object
29